Vollständige Anleitung
Anleitung zum Steigungsrechner
Versteh, wie der Steigungsrechner aus zwei Punkten Δy und Δx, Steigung, Achsenabschnitt, Abstand und die Geradengleichung berechnet.
Vollständige Anleitung
What This Calculator Does
This slope calculator analyzes the line passing through two points in a coordinate plane. It returns rise, run, slope, y-intercept when available, the point-to-point distance, and a readable line equation.
When to Use It
- You want the slope between two points.
- You need to check whether a line is increasing, decreasing, or vertical.
- You want the line equation in a quick numeric form.
- You need both slope and point-to-point distance in one place.
Inputs Explained
Enter two different points:
- first point:
x1,y1 - second point:
x2,y2
These values define one line in 2D space.
How the Calculation Works
The page computes:
- rise =
y2 - y1 - run =
x2 - x1 - slope =
rise / runwhenrunis not zero - distance =
sqrt(run² + rise²)
If the line is not vertical, the page also calculates the y-intercept and writes the line in slope-intercept form. If run = 0, the line is vertical and the result becomes x = constant.
Example
For points (1, 2) and (4, 8):
- rise =
6 - run =
3 - slope =
2
The line is not vertical, so the page also derives the intercept and equation.
How to Understand the Result
- positive slope means the line rises from left to right
- negative slope means the line falls from left to right
- zero slope means a horizontal line
- undefined slope means a vertical line
Common Mistakes
- Entering the same point twice.
- Expecting a y-intercept for a vertical line.
- Mixing up rise and run order after entering points.
FAQ
Why is the slope undefined sometimes?
That happens when x1 = x2, so the run is zero and division by zero is not defined.
Is the displayed distance the same as horizontal or vertical difference?
No. It is the Euclidean distance, not just dx or dy.
Does point order matter?
It changes the sign of rise and run together, but the final slope remains the same.
Notes
This tool is useful for coordinate geometry, graphing practice, and quick line analysis. For midpoint-specific work, use the distance and midpoint calculator alongside it.
Häufig gestellte Fragen
Was passiert bei einer senkrechten Geraden?
Die Steigung ist nicht definiert, und die Seite zeigt eine Gerade der Form x = … statt der Steigungs-Achsenabschnitts-Form.
Dürfen die beiden Punkte identisch sein?
Nein. Identische Punkte legen keine eindeutige Gerade fest.
Zeigt er auch den Abstand?
Ja. Die Seite liefert den geradlinigen Abstand zwischen den beiden Punkten.
Kann ich Dezimalkoordinaten verwenden?
Ja. Die aktuelle Seite akzeptiert gewöhnliche Dezimalkoordinaten.